Bullying in Schools: Terrorism or Child’s Play Essay

Whether you call it harassment, intimidation, or bullying, this form of violence affects many school children each day as they enter their classrooms. Bullying is defined as having three essential components: (1) aggressive behavior that involves unwanted negative actions; (2) a pattern of behavior repeated over time; and (3) an imbalance of power or strength (Olweus, nd). Bullying is not a new phenomenon in schools. It has been prevalent for decades, but the recent reports of suicide amongst bullied children, as well as school shootings as â€Å"pay back† for the torment, is rising in alarming rates. Physical taunting, such as hitting and spitting, along with verbal name calling and malicious threats, turn school environments into a climate of fear and terror for these children. Psychologically, children are affected when they are socially excluded, have vicious rumors spread about them or are humiliated daily (Ericson, 2001). The impacts of bullying follow these children into adulthood, leading to depression, mental health issues and physical problems that affect the healthcare system. Programs that recognize, intervene, and prevent bullying must be implemented in schools to prevent the long-term health issues that will arise in coming years. As a community, a clear message must be sent to ensure that bullying will not be tolerated in schools, consequences will be executed for those defying the programs and that a safe, risk free environment will be provided for all children. The former mentality of â€Å"kids will be kids† will no longer be tolerated. Types of Bullying Bullying can be seen in a variety of behaviors. Dan Olweus, a pioneer in the study of bullying and the author of The Olweus Bullying Prevention Program (Olweus, nd), defines various types of bullying that affect the health and welfare of school-age children. The nine most prominent are: 1. Verbal bullying including derogatory comments and bad names; 2.  Bullying through social isolation; 3. Physical bullying such as hitting, kicking, shoving or spitting; 4. Bullying through lies and false rumors; 5. Having money taken or things damaged by students who bully; 6. Being threatened or forced to do things by students who bully; 7. Racial bullying; 8. Sexual bullying; 9. Cyber bullying including cell phones and Internet (Olweus, nd). According to the U.S. Department of Justice, a report by the National Institute of Child Health and Human Development (NICHD) found that 17 percent of surveyed children responded to having been bullied by others sometimes or weekly, 19 percent had bullied others sometimes or weekly, and 6 percent had both bullied others and were bullied themselves. The survey, the first nationwide research on bullying in the United States, questioned 15,686 public and private school students in grades six through ten. Through this research, it was found that 1.6 million children were bullied at least once a week and 1.7 million children bully others just as frequently (Ericson, 2001). Effects of Bullying The American Medical Association recognizes bullying as a public health problem that leads its victims to suffer from healthcare issues. Forums are held by researchers and healthcare professionals to combat the effects and problems associated with bullying. Among the hindrances identified by researchers and experienced by those who are bullied are headaches, sleep problems, stomach troubles, low self-esteem, depression, loneliness, and thoughts of suicide (Fleming & Towey, 2002). Researchers have found that as many as 160,000 students stay home from school on any given day for fear of being bullied (Fleming & Towey, 2002). Students have a right to feel safe in school and receive the stress free education they deserve. The AMA recognizes that bullying is not just an educational problem or strictly a problem to be addressed by schools and parents. It is understood that this is a healthcare issue that must also be taught to be recognized in medical and nursing schools alike (Fleming & Towey, 2002). Regulatory Issues Currently forty-five states have anti-bullying laws. The state of South Carolina adopted anti-bullying legislation in 2006. Current legislation mandates each school district to adopt a policy prohibiting harassment, intimidation, or bullying at school. The school district must involve parents and guardians, school employees, volunteers, students, administrators, and community representatives in the process of creating the policy (National Association of State Boards of Education, 2009). Most states have suitable laws that reflect what bullying is, how it affects the victim and what school districts must do to decrease the harassment. While this anti-bullying legislation looks perfect on paper, what many school districts lack is enforcement of these regulations within their schools. In January 2010, 15 year old Phoebe Prince from South Hadley, Massachusetts, hanged herself after being harassed and bullied for months from students at her high school. School officials failed to stop it, even though the bullying was â€Å"common knowledge† for months. Phoebe’s mother twice complained to school staffers, and some bullying was witnessed by teachers (Hampson, 2010). Goals and Recommended Solutions The goal is not only to design effective school policy on bullying but to make it crucial to implement and impose its content. A zero-tolerance disciplinary policy must be adopted which would enforce expulsions for fighting, bullying, and violent behaviors (Almond, 2008). Evaluating the policy’s effectiveness to assess the safety and security of the school and identify actions that can make improvements can be accomplished through student and parent surveys. Reports of bullying from victims and teachers will heighten community awareness and will determine whether changes in policy or law must be initiated. It is also necessary to have everyone on the local level involved. Not only school officials and educators, but janitors, lunchroom workers, school nurses, and parents must be willing to make bullying education part of the school curriculum and eager to contribute to the programs. Keeping abreast of current anti-bullying information is essential. Web sites like www.bullyinginfo.org and www.stopbullyingnow.hrsa.gov provide current data and resources associated with bullying (Rudolph, 2010). In October 2010, the South Carolina  Association of School Administrators (SCASA) initiated the Bullying Prevention Initiative through a federal grant (Long, 2010). They are selecting four pilot schools in the state to execute the Olweus Bullying Prevention Program, which is known to decrease bullying by 25 to 50 percent if properly instituted. The training is not mandated by state law and costs about $2000 dollars per elementary school (Long, 2010). Many school officials are hesitant to begin the program because of the cost, but how can we put a price on the safety and health of children? Conclusion To allow bullying to take place in any school is a travesty. The devastating effects may impact children for their entire lives. Healthcare providers, educators, local government, and parents must work together to bring this healthcare issue to a halt. Enforcement of policies must be taken seriously and consequences enforced. This problem affects thousands of students daily and can no longer be tolerated. Suicide and health implications do not occur from â€Å"child’s play.† Bullying is a form of terrorism, and those who oppress and torment others must be disciplined for their actions. References Almond, L. (2008). School Violence. (pp 19). Farmington Hills, MI: Greenhaven Press. Ericson, N. (2001). Addressing the Problem of Juvenile Bullying (Vol. 27). Washington, DC: Office of Juvenile Justice and Delinquency Prevention. Fleming,M and Towey, K,( Eds.) (2002). Educational Forum on Adolescent Health: Youth Bullying. Chicago: American Medical Association. Retrieved from http://www.ama-assn.org/ama1/pub/upload/mm/39/youthbullying.pdf Hampson, R. (2010, April 4). A Watershed Case in School Bullying. USA Today. Retrieved from http://www.usatoday.com/news/nation/2010-04-04-bullying_N.htm Kaiser, C. (2009, May 29). Call bullying what it is: terrorizing. Philadelphia Health Care Examiner. Retrieved from http://www.examiner.com/health-care-in-philadelphia/call-bullying-what-it-is-terrorizing?r Long, M. (2010, October 26). Educators introduce new

All Pro Workout Faq

BASIC POINTS THAT PEOPLE KEEP MISSING: The program uses STIFF LEG DEAD LIFTS! It does not use dead lifts! There are TWO warm-up sets and TWO work sets making FOUR sets per exercise in total! You will start with EIGHT reps of your ten rep max weight! Not ten. This program splits gains between strength and size. You increase the reps every week, you do not increase the weights until completing a 5 week cycle. STARTING WEIGHT What weight should I start with? The correct starting weight is about a 10 rep max (75% of your 1 rep maximum).If that happens to be 150 pounds then the first set would be 35 pounds and the second set would be 75 pounds. Then 2 work sets at 150 pounds. WHEN IN DOUBT START LIGHT! Do I use the same weight for every exercise? NO! Each exercise will be different. REPLACEMENT EXERCISES (These should ONLY to be used if an injury prevents you doing one of the recommended ones! ) Squat: You can sub leg presses or dumbbell squats but they suck compared to what barbell squat s can do. Doing squats even with a very low weight is preferable to any other exercise. Bench Press: ?Overhead Press: Tricep press and standing rows. SLDL: Weighted hyper extensions and hamstring curls. . GENERAL WORKOUT QUESTIONS I’m very weak. Would it be wise to build some strength before doing this program? Nope. This program was designed with YOU in mind. Does this program optimise strength gains? This program will split the gains between size and strength. For more strength or if you’re training for power for a sport I'd use Bill Starr's 5Ãâ€"5. Do I do all 7 exercises every day or split them up into 3 days? You do all 7 exercises 3 times per weekCan I change the order of the exercises? The first four exercises should be done in the order I listed them. Do all of the squats then all of the bench presses and so forth. I didn't put it together to be supersetted or run in a circuit. I could have but then it wouldn't be a ‘SIMPLE' beginners program. If I'm sti ll sore, do I need to wait another day to work out? No, in fact after the medium work out you'll feel better and after the light work out you'll feel better still. Can an increase the number of reps if I get the desired number rather than wait until the next week? No!The reason for the â€Å"easy† weeks will become apparent when you repeat the cycle. It has a built in deload. By increasing the reps sooner you will stall sooner. That means your gains will be cut short because you'll have to deload to get out of it. Can I use regular deadlifts instead of stiff-leg deadlifts? DO NOT USE REGULAR DEAD LIFTS WITH THIS PROGRAM! The combination of heavy dead lifts and heavy squats in the same work out is a recipe for disaster. The stiff leg dead lifts are there to work lower back and ham strings with 1 exercise rather than splitting them up and adding more volume to the work out.How long should I take between sets? You need to rest for a minute and a half between the work sets. It ta kes about 3 minutes for ATP levels to be restored to 100%. In about 2 minutes they're at about 90%. This program is using a combination of ATP and glycogen as a fuel source that's why I choose the 1:30 rest. My usual routine is to do my first warm up set, change the weight and rest 30 seconds. I'll do my second warm up set, change the weight and rest 1 minute. Do the first work set and for this program rest a minute and a half. Can I add other exercises in at the end of my workout?Try the workout as it is first. Give it a chance. But you may add ONE set of pull overs or stiff armed pull downs or pull ups/chin ups. Follow the rep scheme and the heavy, medium, light set up. If that seems to be working well after a 5 week cycle then add the second set. Why can’t I just do 3 heavy workouts in a week instead of heavy, medium and light? Without the heavy, medium, light set-up you will peak out sooner and stall sooner. Google dual factor programming and you'll understand better. Suf fice it to say that with insufficient rest and recovery the program will stall.I couldn't squeeze out all of my reps for curls on the last week. Does that mean I have to keep the weight for every exercise the same for my next cycle? No! Add weight to every exercise that you pass. In the above exercise, everything would move forward but the curls. How long should I keep doing this work out? Simply keep going until you stop progressing with it. Do I need to do the warm-ups? You need the warm up sets for squats, bench press, military press and bent over rows. Warm ups for the other three are recommended but can be cut to save time.CARDIO AND ABS How much cardio should I do? With a 3 times per week full body program you won’t need more than 2 hours of cardio total for the week. If you want to bulk then do much less. Break it up however you want but don't do it before weight training. Do it on off days or after weight training. When should I do cardio? Do it on off days or after w eight training. What sort of cardio should I do? I use HIIT. High intensity interval training. That's just a series of all out sprints and mobility drills. I use a 40 minute, 30 minute and 20 minute set up.The problem with slow cardio is that you are encouraging the fast and medium fibres that you are weight training to convert to a slower type. It can be vary frustrating if that happens. What ab work should I do? It's a matter of what kind of equipment you have and what you respond to. Pull overs, pull downs and knee ups work for me. Crunches, even weighted crunches weren't as effective for me. Typically I use 1 set of 10-20 reps. In other words I use a periodized set up for them also. So starting from work out 1, 10, work out 2, 15, work out 3, 20. Add weight if I can get them all.Usually just 5 pounds. Or repeat the cycle if I can't get them all. Some people need more volume then what I use but I would start with 1 set and do them last or on off days. USING DUMBELLS Can you use d umbbells instead? If you have adjustable dumbbells so that you can get the correct weight then that's fine. The only problem with dumb bells happens when you can't adjust the weight or when you don't have 1 1/4 pound plates. Except for squats. Dumbbells won’t work well with squats because your grip will give out when you progress to heavier weights. Can I do seated shoulder press instead?If possible you should do it standing. In the case of a low ceiling or your gym not allowing it then doing it seated is fine. DIET AND SUPPLEMENTS What supplements should I use? Don't waste a small fortune on magic beans. Get a good diet plan set up and add fish oil, multi mineral/ multi vitamin, creatine and a simple, basic protein powder. Start with simple basic stuff and add things as you go being careful to keep track of what's working for you and what isn't. Should I use protein shakes? Protein shakes are a quick, convenient source of nutrition and you know exactly what you're getting.Th ey are NOT required but I would highly recommend using them post work out. 40 grams of protein and 40 grams of carbs within an hour of completing the work out. Is this routine suitable for cutting? Yes! It works well on a cut because it's self correcting. If you lose too much strength during the cut the worst that happens is that you have to repeat the cycle a time or 2 with the same weight. How much should I eat? This depends on your goals. Total calories: To gain weight: multiply body weight in lbs by 20 To maintain weight: body weight x 15 To lose weight: body weight x 10E. g. if you weigh 200lbs you should aim for 3000 calories per day to maintain that weight. 40% protein, 40% carbohydrate, 20% fat Will this routine work at all for someone training a number of years? It isn't that it won’t work at all†¦ because it will. But the rate of progression would have to be slowed down. After a while you won’t be able to increase by 10% every 5 weeks. At the very least you'd have to reduce that to 5% and drop it to twice per week with 2 heavy work outs. Your recovery doesn't improve as fast as your ability to do damage.

Essay 4 Water, Xeriscapes and Native Plants Example | Topics and Well Written Essays - 1250 words

4 Water, Xeriscapes and Native Plants - Essay Example Requirement of seasonal variations of irrigation and water distribution systems remains a major puzzle in the way of solving urban water usage issues (Dzieglielewski et al, 1990). Open-air conservation of water would call for an imperative policy focus throughout several divisions of the state. Such policy restructuring would delimit the enhancements in water demand and free up the existing water supplies that would accommodate new constructions and residents. One of the essentials of the policy framework would include water-efficient changes in landscaping practices. (Hanak and Davis, 2006) Now, in order to change the landscaping practices, individuals and agencies must concentrate on a major aspect of American manmade landscapes: The lawns. In USA, people are generally fond of lawns and they are preferred for both purposes (Government buildings, parks, military barracks, etc.) and domestic architecture (cottages, bungalows, community housing, etc.) (Ratliffe, 2002). However, lawns are not water-efficient, and they can be considered as water costly landscapes for a state like California. When people are advised to avoid creating lawns, some individuals think that the Government has no right to restrict the usage of water since they are paying for it. Therefore, they neglect the fact that the lawns are water costly and delimiting the extent of lawns can eventually help their own generations in the long run. Such behavior can thus be explained by the lack of education and training in water management. (California Urban Water Conservation Council, 2005) Next, people start arguing that they have the basic freedom and right to have single-family houses if they can afford it. Single-family homes may increase water consumption due to more distribution requirements and less organized community use of the water supplies. In the case of single-family homes, a considerable percentage of the households do not deploy irrigated landscaping in their gardens and adjacent plot s, which invariably consist of lawns (Water Resources Engineering, Inc, 2002). This is an unwise reasoning since personal will cannot be more important than community wellbeing. Another argument is that lawns have more greenery which is friendly towards the environment and its air quality. This is a sort of excessive simplification of the environmental issues. The fact is that we need considerable number of mowers to maintain the lawns. The mowers increase air pollution and consume lots of energy. Moreover, excess water is necessitated due to the trimming, sprinkling, and gardening requirements. (Department of Water Resources, 2004; Ratliffe, 2002) Part 2: Replacing Lawns with Xeriscaped Gardens In the context of water conservation, xeriscaped gardens can be a better alternative to lawns. Xeriscaping  is a method of landscaping, which minimizes requirement and use of water. Xeriscape actually deploys smarter ways for saving water and suite the climatic needs of the area it is depl oyed wherein. (Ellefson and Winger, 2004) In general gardening and decorative architectural designs, various decorative and even foreign plants are grown alongside the lawns. Plants, which have natural requirements appropriate with respect to the local vegetation and climate, are often neglected. In the case of arid and semi-arid parts of California, most of the decorative plants and expansive

Art Essay Example | Topics and Well Written Essays - 500 words - 59

Art - Essay Example Music may communicate either good or bad information that can influence the behavior of people. People act differently depending on the music that they take pleasure; People tend to love the individuals who have the same taste of music they love. Such individuals tend to be friends with one another. On other hands, people with different taste of music may tend to hate one another. For instantly, people with the same taste of music tend to hang out together, while ignoring others, this due to their different opinions. Music plays very vital part in the society; it can be used for various purpose, from general to specific purposes. The use of music may depend on the occasion in the environment. Rock and rap music play very significant role in the world today; they may both send messages with the positive impacts on the kids. They convey messages of real personal life experiences; therefore, kids undergoing the same personal life experience tend to listen to such music. Through listening to such music, they gain hope since they are not the only ones undergoing such problems. Such challenge includes sex, and drug addictions. Music generally may also enhance the acquisitions of new ideas, as the messages expressed in the music may express new information’s from different parts of the world. This enhances the kids’ awareness, and makes them be open-minded people with vast information from various part of the world. They also get exposed to different from different part of the world like the celebrated artists. Among other types of music, majority of people from various part of the world tend to agree that Rap music plays very significant in the world. The information conveyed in most of the rap music’s revolves around drugs and sex. They are the critical topics which many parents do not love their kids to get associated with. Most videos of rap music entail information concerning issue of sex and drug. The research has

Identify and explain key difference between Europenization and Term Paper

Identify and explain key difference between Europenization and Globalization - Term Paper Example According to neo-liberal approach (Ladi 2007; Held 1999), Europeanization converts principles of Western liberal democracy, European identity and cooperation with regional organizations. The paper contains research and comparative analysis of two above phenomena in such spheres as regionalization, governance institutions, public sector reforms and Eastern European enlargement. Discovering differences of two above phenomena, it is necessary to define them as independent integral processes. For instance, Held and Iankova (Held 1999; Iankova 2007) claim that globalization weakens state structure and promotes overall policy change. Deregulation policy in mass media or any other economic sphere occurs parallel to political liberalization. On the one hand, it could become a source of efficient innovative modes of governance and statehood weakening. In this case, globalization is â€Å"a process in progress, where a large number of governmental and non-governmental agents plays an important role within the system of global governance.† (Ladi 2007, p. 4) It promotes regional integration and modification of governmental institutions in the EU. There is a widespread standpoint that Europeanization is a subsystem of globalization (Einhorn and Logue 2004). For example, economic globalization predetermines flourishing of economic models of the EU member-states. It results into deregulation, simplified taxation, goods transportation and broadening of national labor markets in Scandinavian countries. The authors analyze mechanisms of globalization within domestic environment. As Scandinavian countries have a mixed economic model with limited state ownership (Einhorn et al. 2004), governmental intervention into economic life of local communities has decreased. â€Å"Even public sector debt to GDP ratios and fiscal policy are explicitly impacted by

Integrate to Marketing Communication Essay Example | Topics and Well Written Essays - 1000 words

Integrate to Marketing Communication - Essay Example Introduction In order to suggest what makes Arnott’s Tim Tams company a strong brand name one has to have a closer look at the corporation’s competitive advantage, its strength and weaknesses; the client fairness and their market blending. Considering the company’s products, its organization and its mission, its competitive advantage is its reasonable trademark. Clients who purchase fair trade products are viewed as being decent consumers. Ethical consumers are concerned with fair prizes among other things (Schultz et al.2002). Therefore, it can be suggested that Arnott’s Tim Tams competitive advantage is its reasonable trademark because it deals with a particular type of consumer who is willing to pay more money for products and become loyal to the company, which on the other hand is selling fair trade products. Furthermore, Arnott’s Tim Tams product success is one of its chief strengths. The company pays a lot of focus to the quality of its produc ts and its suppliers. For that case, this is the reason why the customers are considerably fulfilled and are eager to pay more. Arnott’s Tim Tam clients can be certain that they will purchase high standard products. Context Analysis As much as client fairness is concerned it can be suggested that it comprises of value fairness, brand justness and affiliation equity. Patrons who are justly worried about the concern of fair trade are most probably to bond with Arnott’s Tim Tams biscuit chocolates if they are the just fair trade brand in the area. Bringing a closer look at Arnott’s Tim Tams marketing blend, 4Ps can be taken into account. The price, product, place, and promotion. Taking into account Arnott’s Tim Tams product prices, it can be suggested that its products are not cheap, but simultaneously they are affordable. The patrons understand the fact that they pay more for the product bearing in mind that they embrace fair trade. The chocolate biscuits i ndustry is becoming more concerned with very precise target markets. The premium chocolate, for example is very prominent. The threat of chief producers penetrating in to the classification is rather high. Arnott’s Tim Tams brand is well valued amid those who have had the privilege of feeling the product. The brand has a paltry market share than the bigger competitors in the classification who have more monetary influence and extensive market share. Conversely, economic development has been reducing globally, with a lot of consumers losing their jobs and taking key pay cuts (Schultz et al. 2002). Going by the specifics, consumers are measuring their spending patterns and are cutting out on extravagant things and opting for inexpensive varieties of certain products. With respect to market trends in the chocolate biscuits industry, one great opportunity for Arnott’s Tim Tams could be to make their chocolate biscuits not just for fair trade product, but also a premium pro duct. Arnott’s Tim Tams company could as well increase its market share by growing many distinct unique tastes. If there is any more opportunity, it is probably that the company will attract more consumers. The other opportunity for Arnott’s Tim Tams lies in printing the cocoa content on its products for customers who are attentive on this. Ultimately, the company could begin a new, entirely natural, product side. As a result, these consumers will see it as fair trade and natural. This will be very appealing to their present consumer

Benefits of Implementation a Good Accounting System Essay - 3

Benefits of Implementation a Good Accounting System - Essay Example Accounting system requires three financial accounting documents; the balance sheet, which determines financial position of the business, income statement, which shows if the business is making a profit or loss and finally and cash flow statement which shows money inflow and outflow in the business. Business activities are run by money given to the management body by the owners. Therefore, a financial statement is useful in monitoring the effectiveness of management. Financial statements also act as a tool used in making an assessment. These statements show how management spent resources allocated to them in the process of reducing the company’s cost and increasing profitability (Kieso and Weygandt 34). It is the work of the accounting department to make such assessments and give a report. Good accounting system helps a company’s stakeholder to make economically informed decisions. The decisions made are based on the information received after analyzing financial statements. Business decisions are always based on accounting information. The accounting system is also very important for record keeping. Information collected from numerous sources is received, analyzed and communicated to the prospective users for decision making. Based on accounting details, company records can be used to make monetary policies. Efficient accounting system helps to detect deception by putting in proper internal control mechanism to monitor events (Kieso and Weygandt 47). Effective and efficient tracking of internal events can be achieved by having a good accounting information system in place.

Supply Determinants of Coffee Coursework Example | Topics and Well Written Essays - 500 words

Supply Determinants of Coffee - Coursework Example This research will begin with the statement that agricultural phase involves the cultivation of green coffee employing different methods and treatment such as soil management, use of fertilizers, treatment of pests and harvesting that are influenced by the cultivation practices, a topology of the plantation, and method of harvesting. Upon harvesting two methods can be used to process it namely dry method –is an old, simple and natural method that is mostly is used in processing all Robusta coffee. The other being wet method-here specific equipment and water is used. The Arabica type is mostly processed by this method and it normally produces the better quality that commands high prices in the market. Production phase; involves processing and packaging. The processing in this stage involves storing; cleaning and weighting; roasting; blending; grinding. The powder produced after processing is normally subjected to different processes so as to develop the varieties such as the in stant coffee manufacturer. In the packaging, the stage includes many different types of primary and secondary packaging for roast coffee depending on the choices of the company. Input prices that are inversely proportionate the supply of coffee .i.e. when the prices of raw materials goes up the supply of coffee would reduce; productivity in terms of production cost is directly proportionate the supply .i.e. if involvement of a technology makes production cheap then the supply of the product will definitely shoot; price of substitute is directly proportional to the supply of the product hence if the price is low then the supply of the product with definitely be down; expected future price of the product if expected to accelerate in the future the supply of that product will go down in the present since the producers would be hoarding them for the future. Demand is the number of goods a consumer is able to purchase at a given price. The determinants include The disposable income of th e consumer is directly proportionate to the demand for a product in that should it increase the consumer will demand more; consumer preference is directly proportionately to demand i.e. consumers will tend to demand what they prefer; price of related goods if increases the demand of the substitute will also shoot; expectation of future prices if is to raise the demand of the goods at the present will increase in fear of the price rise.

Audit program design part ii Essay Example for Free

Audit program design part ii Essay With the exception of cash sales, every transaction and amount is ultimately included in one of two balance sheet accounts, accounts receivable or allowance for uncollectible accounts. There are eight business functions for the sales and collection cycle. The first four processes are for recording sales, while every other class of transactions includes only one business function. The four sales transaction functions are necessary for getting the goods into the hands of customers, correctly billing them, and reflecting the information in the accounting records. The remaining four functions involve the collection and recording of cash, sales returns and allowances, write-off of uncollectible accounts, and providing for bad debt expense. Classes of TransactionsBusiness Functions SalesProcessing customer orders Granting credit Shipping goods Billing customers and recording sales Cash ReceiptsProcessing and recording cash receipts Sales returns and allowancesProcessing and recording sales returns and allowances Write-off of uncollectible accountsWriting off uncollectible accounts receivable Bad debt expenseProviding for bad debts (Arens, 2012, p.443) The direction of testing for sales is as follows: Customer orders; Shipping Documents; Duplicate Sales invoices; Sales Journals; and General Ledger. (Arens, 2012, p. 455) Tests of Controls For each control, there should be at least one test of control, but there can be more than one. We will gather evidence for internal controls by: Documentation; Observation; Inquiries of the client; and Re-performance. The tests create audit evidence that support the common assertions for the business cycle: ïÆ' ¼Existence and Occurrence: to ensure that sales are recorded for shipments to genuine customers; ïÆ' ¼Completeness; All existing sales transaction are recorded; ïÆ' ¼Accuracy: to ensure that amounts of sales for quantities shipped is recorded and billed accurately, is summarized appropriately and is traceable to accounts receivables master file; ïÆ' ¼Presentation and disclosure/ Classification: Sales transaction are appropriately classified; and ïÆ' ¼Cut-Off: The sales are recorded in the accounting period in which these were incurred. We propose the following tests of controls for Sales and Collections: ïÆ' ¼Examination of purchase orders from customers for evidence of customer approval; ïÆ' ¼Inspection of sales invoice for supporting documentation; ïÆ' ¼Tracing Sale invoice figures to bill of lading and customer order; ïÆ' ¼Inspection of batch control file for initials of data control clerk authenticating sign off; ïÆ' ¼Follow up on the sequential pattern of Shipping documents; ïÆ' ¼Examination of file for batch totals and initials of data control clerk; ïÆ' ¼Inspect the internal verification documentation package; and ïÆ' ¼Re-perform reconciliation of customer debtors master file totals to general ledger balance. Substantive Tests of Transactions For each transaction, there should be at least one substantive test, but there can be more than one. We will gather evidence for internal controls by: Documentation; Inquiries of the client; Re-performance; and Recalculation. The tests create audit evidence that support the common assertions for the business cycle: Existence and Occurrence, Completeness, Accuracy, Presentation and disclosure/ Classification, and Cutoff. We propose the following substantive tests of transactions for Sales and Collections: ïÆ' ¼Ensure that the sales invoices are serially numbered; ïÆ' ¼Review master file and sales journal for unusual transactions and abnormally high or low amounts; ïÆ' ¼Trace the sample of selected sales journal entries to its supporting documents like , bill of lading and sales order inter alia , also check duplicate sales invoice issued (if any); ïÆ' ¼Trace information as per shipping documents to the sales journal; ïÆ' ¼Trace sales journal ledger entries to sale invoices on sample basis; ïÆ' ¼Verify amounts on the sale invoice by re-computing price and extension on the same; ïÆ' ¼Trace amounts of sales from Sale invoices to customer orders, sale order and shipping documents like bill of lading etc.; and ïÆ' ¼Trace selected invoices from journal to the Trade debtors’ master file and test amount, date, and invoice number for valuation and cut off. Analytical Procedures Because analytical procedures are substantive tests, they reduce the extent to which the auditor needs to perform detailed tests of balances, if the analytical procedure results are favorable. Our audit team performs analytical procedures for the entire sales and collection cycle, not just accounts receivable. When we perform analytical procedures for sales, we obtain evidence about both sales and accounts receivable. We propose the following analytical procedures for Sales and Collections: Analytical Procedure Possible Misstatement Compare gross margin percentage with previous Overstatement or understatement of sales years (by product line). and accounts receivable. Compare sales by month (by product line) Overstatement or understatement of sales over time. and accounts receivable. Compare sales returns and allowances as a Overstatement or understatement of sales percentage of gross sales with previous years returns and allowances and accounts (by product line). receivable. Compare individual customer balances over a Misstatements in accounts receivable and stated amount with previous years. related income statement accounts. Compare bad debt expense as a percentage of Uncollectible accounts receivable that have gross sales with previous years. not been provided for. Compare number of days that accounts Overstatement or understatement of receivable are outstanding with previous years allowance for uncollectible accounts and and related turnover of accounts receivable. bad debt expense; also may indicate fictitious accounts receivable. Compare aging categories as a percentage of Overstatement or understatement of accounts receivable with previous years. allowance for uncollectible accounts and bad debt expense. Compare allowance for uncollectible accounts Overstatement or understatement of as a percentage of accounts receivable with allowance for uncollectible accounts and previous years. bad debt expense. Compare write-off of uncollectible accounts as Overstatement or understatement of a percentage of total accounts receivable with allowance for uncollectible accounts and previous years. bad debt expense. (Arens, 2012, p. 524) Payroll and Personnel Cycle The personnel and payroll cycle of Apollo Shoes Inc. must be audited with the inclusion of tests of controls, substantive tests of transactions, and analytical procedures. Tests of account balance details are not required considering the balance sheet accounts regarding payroll are not of a material nature (Arens, Elder, Beasley, 2012). Transactions within the payroll cycle have the potential for materiality and are therefore far more important when designing the audit program. Test of Controls Internal control over the payroll and personnel cycle is significant to the accuracy of each payroll transaction. In order to properly test controls regarding each of the audit objectives listed above the design for test of controls includes several review and examination factors, as well as discussion with employees. Substantive Test of Transactions Tests of transactions may happen during the testing or internal control or may happen after the internal control has been tested depending on the most efficient way to conduct the audit program. Tests of transactions for the personnel and payroll cycle are of high importance because of the volume of transactions throughout the accounting period. Transaction testing allows for identification of irregularities and potential misstatements in payroll. Apollo Shoes Inc. uses an internal form known as a â€Å"take home sheet† that indicate gross pay, each deduction, net pay, and year to date totals for each employee (Louwers Reynolds, 2007). Examination and comparison of this form, the corresponding payroll register, and the corresponding canceled checks will make up a large portion of the tests of transactions. 1.Compare canceled checks with payroll register 2.Compare canceled checks with take home sheets 3.Compare payroll change documents to payroll employee files 4.Recalculate register entries and take home sheets 5.Recalculate hours worked from time records (Arens, et al., 2012) 6.Compare payroll register and take home sheets with vouchers paid 7.Examine employee records for all unclaimed checks 8.Compare â€Å"paid† register and vouchers with master payroll file 9.Examine time cards and time clock Analytical Procedures Analytical procedures as a part of the audit program allow for the relatively quick comparison of specific account details that may lead to identifying possible misstatements that require additional detailed testing (Arens, et al., 2012). Analytical procedures involve the use of current and historical information to make comparisons. If the comparison result differs from the expected then additional testing will be necessary. Compare salary expenses to those from last year in order to determine if the expected increase in salary expense is reasonable (Louwers Reynolds, 2007). Compare total payroll expense to previous years accounting for pay and volume increases to establish whether or not there are misstatements in payroll expenses (Arens, et al., 2012). Compare sales to last year and review these in order to determine if the changes in payroll and sales are relative from one year to the next. Increased sales with a decrease in payroll for example may indicate a misstatement. Compare payroll tax expense as a percentage of salaries and wages to previous years to determine potential misstatements in payroll tax expense (Arens, et al., 2012). Review executive salaries and determine if they correspond to the salaries authorized in the board minutes (Louwers Reynolds, 2007). Acquisition and Payment Cycle With the acquisition and payment cycle, there are three main transactions in this cycle, which entail: ïÆ' ¼Attainment of merchandises and amenities, ïÆ' ¼Cash distribution, and purchase returns, and ïÆ' ¼Allowances and buying reductions. The first assessment goal is to check for existence by confirming that acquisition demand, purchase order, receiving report, payment transactions and merchant statements are attached to the coupon. It needs to be confirmed that the level of credit authorization is accurate, entrance of acquisitions are from approved merchants only, and that each transactions are appropriate. Then the, papers are studied for existence, merchants are certified, and payable records are reviewed for uncommon accounts. The fixed assets that are attained are observed too. The next audit goal is to check control for extensiveness by testing that the transactions are renumbered and in sequence order. Transactions are outlined to coupons and journals. Additionally is to assess controls for correctness by validating that the calculations are accurate and are associated to summary reports. The journals and reports are paralleled for correctness. The goal of the assessment is to check controls for arrangement by validating account grouping and inspecting the chart of accounts and processes by linking the grouping through the chart of accounts as they mention to the merchant’s statement. The audit goal is to assess the controls for timing by validating periods and observing and witnessing unrecorded merchant statements and transactions. These are confirmed on the inside. The dates of acquiring these reports and statement are then paralleled with dates of acquirement and payment transactions. The assessment platform is intended to let the business to comprehend how the auditors will be testing internal controls. This sequence of exams and methodical processes are intended to demonstrate the worth and rationality of the sales and collection cycle, payroll and personnel cycle, and acquisition and payment cycle. The exams center on existence, wholeness, and correctness. Once the exams are done, we will have a better indication on how to continue with the remainder of the assessment. It will help to regulate how long the assessment might be and what the price could be. References Arens, A. A., Elder, R.J., Beasley, M.S. (2012). Auditing and assurance services: An integrated approach (14th Ed.). New York, New York: Pearson. Louwers, T. J., Reynolds, J. K. (2007). Apollo Shoes Casebook. New York, New York: McGraw-Hill.

Ergonomics with Hand and Power Tools Essay Example for Free

Ergonomics with Hand and Power Tools Essay Ergonomics, derived from the root word ergon which means work and nomos which means laws, is the study of the related interaction of humans and the objects being used to perform a specific task, process, or function. It is considered system-oriented regulations and practices applicable to various facets of human activities. Its main concern is on optimizing human performances and well being at the same time achieving a desirable system output or performance. In a simple term, correct ergonomic design will prevent humans or workers from repetitive or continuous injuries due to strain or stress on a specific part of their bodies, which if not corrected will lead to a possible long-term injury or worst, disability. To achieve this objective, humans or the workers must â€Å"fit† to the given tasks or work. Their limitations and capabilities are given into account to ensure that the equipment, tasks, output information, and the environment will suit each worker. To access the person and their related work, the ergonomists (individual specializing on ergonomics design) considers the tasks being done and its related demands towards the worker; the necessary equipment (shape, size, process); and the information being used (how it is accessed, changed, or presented). Usually, ergonomists utilizes references from other field of disciplines such as mechanical engineering, industrial engineering and design, anthropometry, physiology, psychology, and biomechanics. Often times, the principles of Ergonomic can be seen on the innovation of the equipment or machine, and the creation or enhancement of safety procedures. The field of ergonomics is actually divided into three major domains: The Physical ergonomics, which is concerned with the human physiological, anatomical, biomechanical, and anthropometric characteristics, as they are associated to specific physical activities. Examples of which are the postures during work, layout of the workplace, health and safety, handling of materials, continuous repetitions of movement; the Cognitive part of ergonomics which is concerned with the mental activities such as memory, perception, reasoning and psychomotor responses, as these influences the inherent interactions between humans and the system (tasks, machines or equipment, and information). Examples of which are the human and computer interactions, decision making, and mental work stress and work load; the Organizational ergonomics which is concerned in optimizing systems with respect to organizational structures, processes, procedures, and policies. Examples of which are ergonomics within the community, crew communication and resource, quality management, virtual organizations, and teamwork. Aside from this three major domain, there are five aspects of ergonomics, which concerns on the following: Aesthenics – example is the signage used in the workplace in such a way that it would be pleasing and at the same time provides information will be very much accessible to the workers. Comfort – example is the design of an alarm clock should give emphasis on its contrast in the dark so that eyestrain can be avoided. Safety – example is the labeling on the bottle of medicine should be ergonomically designed in terms of color and size of letters so that the patient with impaired visions can see more clearly the dosage. Ease of use – example is the street light should be strategically and visually located to be accessible to the motorists so that possible accidents may be prevented. Performance and productivity – example is the use of a specific machine in the sense that the worker must be ergonomically situated to prevent accident and maximize performance and productivity. Consequences of ignoring ergonomics include some but not all of the following: strain and injuries, increase lost time, less output in production, high material and medical costs, absenteeism, increased probability of work-related errors and accidents, and low quality of work (Holland, 2000). History The foundation of ergonomics have been seen in the culture of the Ancient Greece around 5th Century in the design principles of their hand tools, and workplaces. Very eminent were the hand tools in the form of axes, adzes, cramps, vices, benches, planes, gouges and chisel, pliers, pincers saws, rasps, and files. The usual handle at that time was made of wood and the antlers of reindeers were sharpened to create a sharp edge. The wooden handle was not smooth and has curvatures to fit the grip of the user. The sharp edge was almost tied to be perpendicular to the handle so that the worker’s arm can have a thrust on the object being cut. Since ergonomic was not prevalent at that time, the design of the handle as well as the orientation of the sharp edge illustrates the principle of ergonomics. These materials were used during 6000 BC then at around 3000 BC bronze and copper materials replaced the sharp edges. Screw vices were eminent during the 17th century Roman and Greek period. pegs were driven unto pre-bored holes on top of the bench. Again these were made of wooden parts not until the early 19th century that it was replaced by metal cramps and the design was changed to a â€Å"G† cramp structure. Planes during the 17th and 18th century manifests carved decorations and scrolled handles. During the 19th century major improvements were made wherein double cutting edge and iron were designed to prevent tearing. Early hammers were in the form of simple hand- held stones and made of iron, bronze, and steel. The early Romans used nails that lead to the development of the claw hammer at present (Marmaras, 1999). The evolution of power tools began in 1813, when a shaker in the name of Sister Tabitha Babbit, had a vision of a teeth ringing around a rim of the wheel spinning. This led to the development of the principles of sawing. Before Babbitt’s vision, sawing usually comprised of two-long ripsaws handled by two workers from one end to another. The spinning wheel were soon incorporated by circular blade then later on being run by machines through electricity rather than being actually performed by humans. The principle of the spinning wheel design contributed to the innovation of the sawmill. Ergonomically, the two-long rip saw proved to be very inadequate for two workers were needed to accomplish the task. In the development of the spinning wheel, one person is only needed to accomplish the task enhancing productivity. In 1867, Wilhelm Fein developed the first power hand drill through incorporating a minute electric motor to able to drill. Ergonomically, both hands were used to hand drill cast- iron and heavy metals, and shoulder strap and breastplate were used to prevent injury. Justus Traut, an employee of Stanley Rule and Level co. , developed the first ergonomically designed handles designed to make tools easier to hold such as block planes and levels. The patent was known to be the â€Å"Hand-y† grooves. Edmund Michel and Joseph Sullivan, in 1923, created a circular saw, which was in the form of a power hand tool to cut specifically lumbers, which was eventually called the â€Å"Skillsaw†. The evolution of hand and power tools is vast that only brief descriptions are given above. The principles of ergonomics can be seen on every design with emphasis on the functionality and safety of the user. Innovations on the materials used were obvious and technology changes the type of materials, design, and procedures, in conjunction with sound ergonomics principles (Sanders, 1993). Ergonomics applied to Hand and Power Tools Tools are considered one of the equipment being used in everyday activities. Whether it is intended for work, house hold activities, or creating something during leisure times, the necessary knowledge on the nature of the tools, how it is being operated, its corresponding risks, and the proper ergonomic procedures should be considered. Usually, tools are manufactured with safety taken into consideration when it is being used by humans or by the workers, but it can still possibly pose relevant hazards when used inappropriately. Tools are categorized into two parts: The non-powdered tools which includes screw drivers, pry bars, wrenches, axes, etc. ; and the power tools, which utilizes electricity to become functional, includes, hydraulics, electric- pneumatic, and powder actuated. The applications of Ergonomics manifested on the safety of the user and to their co-workers, to the quality of work and the overall process. Hazards should be considered as a basis for an ergonomic recommendations and approaches. Hazards of Using Hand Tools The hazards of using hand tools may emanate from the user itself: improper handling and maintenance, and misuse. Ergonomic Recommendations Since the hazard on using hand tools greatly depend more on the nature and awareness of the user, the following ergonomic solutions are advised: †¢ The worker or the user has a direct responsibility for the maintenance, proper use, and safe conditions of the hand tools being used. †¢ The workers must be trained that sharp ends of the hand tools such as those of knives and saw blades should be kept directed away from other nearby workers. †¢ Scissors and knives should be kept sharp at all times since dull tools can be more dangerous than sharp ones. †¢ The working area or specifically the floors should be kept dry and clean at all times to prevent workers from accidentally slipping with a sharp hand tool on their hands. †¢ On working inside a flammable substance environment, spark-resistant tools should be made for hand tools such as aluminum, brass, plastics, or wood. Power Tools Hazards When not properly used, power tools can cause harm and injuries, since it is utilizing electricity to operate. Ergonomic Recommendations †¢ Avoid carrying the tool by using hose or cord. †¢ Do not attempt to pull the hose or the cord to disconnect it from the receptacle. †¢ Tools should be disconnected from the power source before charging or servicing parts. †¢ Both hands should be used to operate the tool; secure the work with a vise or clamp. †¢ Keep the finger away from the on button unless the tool is to be operated. †¢ Keep the manufacturer’s manual for maintenance instructions on lubrication and changing parts. †¢ Always maintain good stance or balance when utilizing power tools. †¢ Avoid wearing accessories that may interfere when using power tools. †¢ Tag tools that are defective and keep it away from the working tools. Different ergonomic approaches are also considered on Guards, electric tools, powered abrasive wheel tools, pneumatic tools, powder-actuated tools, hydraulic tools, and jack hammers. Guard †¢ The safety guard should never be removed whenever a power tools is in operation. Electric tools †¢ These tools should have a three-wired cord with the third wire being the grounding wire to avoid electric shock. †¢ Always operate electric tools within the limit of their design specifications. †¢ Always wear protective gloves, and safety shoes. †¢ Store the tools in a dry and secured place. †¢ Do not operate the tools on wet or damp places to avoid electric shock. †¢ The working area should be well illuminated. Powered Abrasive Wheel Tools These tools are used for cutting, grinding, and polishing where when utilized may throw off fragments that can harm workers. Whenever this kind of power tool is used, always bear in mind the following ergonomic recommendations: †¢ Always use protection goggles for the eyes. †¢ Do not stand directly in line with the front wheel not until it reached its full working speed. †¢ The wheel should be inspected before mounting it to the tool. †¢ Turn off the power when the tool is not in use. †¢ Never use vise on clamping hand-held grinders. Pneumatic Tools The different types of pneumatic tools are hammers, drills, sanders, and chippers, and usually use compressed air to operate. The hazard of which is that a worker may be stroked by one of the tools fastener or attachments. Given below are some of the ergonomic recommendations. †¢ Always wear eye goggles for protection, ear buds for protection and a face guard. †¢ The hose should be checked if it is fastened securely †¢ A retainer or a safety clip must be installed to prevent the attachments from being drawn towards the barrel. †¢ Protective screens should be set up to protect nearby workers from the fragments †¢ Avoid pointing pneumatic tools directly towards another person or workers. Powder- Actuated Tools This kind of power tools should be treated with extreme caution and only trained personnel can use such tools. Hydraulic Tools †¢ Only use approved fire resistant fluid that can retain its properties when exposed. †¢ Do not exceed the recommended manufacturer’s operating pressure. Jacks †¢ All jacks must always have a form of a safety device that will enable the tool to stop. †¢ The load limit must not be exceeded. †¢ Secure the base to be stable and on a level surface. †¢ Proper maintenance should be observed: regular lubrications and checking on parts for damages. Given above are only some, but not all, of the safety procedures that must be observed in using hand and power tools. These relatively illustrate several safety practices based on the probable hazards among the workers. Since one of the major concerns of ergonomics is the safety of the workers, the procedures above â€Å"fits† workers and equipment to achieve desired result with minimal loss or injury. Generally workers using hand and power tools can be categorized into three model groups: the professionals who are skilled on using such tools; the so-called itinerant worker who is considered to be skilled and trained but with less experience and mostly self-thought; and the last is the one who only purchased a power tool for home use with no professional training after all. Since the first model comprised the professional groups, they can be considered as a skilled worker having sufficient knowledge and training on using such tools. Ergonomic considerations for such users should be emphasized on the safety functions of the tools such as limiting shields, retracting guards, safety catches, locks, and automatic stops. However, on the second and on the third model group, an awareness of the safety standards is a must aside from the safety features of the tools. These safety standards usually contained in the Occupational Safety and Health Hazards lists the minimal requirements on power hand tools. Examples of such are the following: Portable Circular Saws – These tools should be equipped with a guard below and above the base shoe or plate. Swing or Sliding Cut-off Saws – these tools should be provided with a hood that will totally enclose the upper half portion of the saw. Electric Power operated tools – these tools should have double insulation or be grounded accordingly. Hand Tools unsafe hand tools should not be given permit; impact tools should be inspected free of mushroom heads; wooden handles should be free from defects or cracks. Aside from the safety standards, practices and procedures for hand and power tools, several ergonomic innovations are being created to increase the safety of the workers especially for the third model group. Several examples of ergonomic innovations on hand and power tools are the Craftsman’s Twin cutter (Fig. 1), the Arbortech Allsaw 150 (Fig. 2), and the Saw stop system (Fig. 3). These innovations, intended mostly for the third model group, provides safety, and improved functionality to achieve comfortable handles, better balance, and self-holding triggers. Fig. 1 Fig. 2 Fig. 3 Conclusion To eventually avoid the possible hazards associated in using power tools, the workers must learn how to recognize the relevant risks in using such equipment and its safety procedures on handling and using such. All workers must be trained in using hand and power tools to avoid accidents. Safety helmets, goggles, ear buds, and uniforms must be provided to workers exposed on splashing fragments caused by the power tools. Hazardous areas where the power tools are being used should also be in consideration to avoid accidents. Different power tools innovations are now being considered to provide safety and functionality to those who are not a skilled user or worker. Over all, principles of ergonomics apply to broad applications: safety and innovations are some of the very applications of this in relation of utilizing hand and power tools. REFERENCES Hollands, James (2000). Engineering Psychology and Human Performance. Prentice Hall. Karl, Kroemer (2001). Ergonomics : How to Design for Ease and Efficiency (2nd Ed. ). Prentice Hall International Marmaras, Nathaniel (1999). Ergonomic Design in Ancient Times. Prentice Hall. Sanders, Mark and McCormick, Ernest (1993). Human Factors in Engineering and Design (7th Ed. ). McGraw Hill International. Stanton, Nate (2005). Handbook of Human Factors and Ergonomics Models. CRC Press Tilley, Alvin (2002). The Measure of Man and Woman: Human Factors in Design. McGraw Hill.

Tourism And Economic Growth Of Sri Lanka Tourism Essay

Tourism And Economic Growth Of Sri Lanka Tourism Essay 1. Tourism is a good business in modern world to attract foreign currencies and it gives a large number of occupations to the people. Modern tourist industry develops with various requirement or purposes of tourists like pleasure, business, education requirement, research and many some more other visit foreign countries during their vacations or winter seasons of their native countries. Because they expect to reduce their expenses and difficulties due to seasonal changes. 2. Thailand, Brazil, Singapore, Malaysia, India, Maldives and Indonesia are the most famous tourist destinations in modern world. Sri Lanka is also a world famous tourist destination and known as a Paradise Island in the world. Country size, geographical variation, climatic condition, cultural and heritage sites, natural environment and tourists expenses are the key facts to attract tourists to the country. 3. But this paradise Island suffered with a thirty years conflict situation and during that time tourist industry collapsed. Tourists rejected this Island with conflict environment because there have been many explosions in Colombo and suburban areas. As well most states labeled this country as non tourism destination for safer visits. As a result most tourists were attracted to other destinations like Fuket Island, Maldives and Thailand. 4. Tourist industry of Sri Lanka regenerated after the end of crisis environment of the country and started a new economic development programme since 2009. Giant infrastructure resources invested to boost the economy of the country. This miracle was started after the dawn under sustainable peace and political environment of the country. Foreign money is very important for these developments because economy development highly expects to attract foreign currencies under many ways like Foreign Direct investments, Aid, foreign occupations, tourism and loan facilities. 5. Sri Lanka is expecting to develop this country as a major tourist destination in Asia. Sri Lanka has various opportunities to achieve that goal like pleasure tourism, eco tourism, cultural and heritage sites, religious base tourism, business, education and facilitator as a centre of international transportations. But tourism sector need wide range resources and facilities to develop that as the main economic sector contributor. Present infrastructure development programme concerns to develop tourist sector requirements like international standard roads, hotels, urban areas, aviation and harbor sector developments. 6. International tourism is a giant business because it consists with large number of services and requirements. Tourists visit to take new experiences and pleasure from their visits. They do not expect complex legal procedures and restrictions from their destination places. In contrast tourist industry gains some big troubles to host country as sexually transmitted diseases, illegal drugs and social challenges. Therefore Sri Lanka needs to concern balance economic development through tourism in the future. AIM 7. The aim of this paper is to discuss the development of tourism industry and its contribution to develop the economy of Sri Lanka. IMPORTANCE AS A TOURIST DESTINATION 8. Tourist destination needs stronger opportunities to attract tourism easily because tourists expect different environments than their home or states. Natural splendour, scenic beauty, tropical climatic condition and historical sites increased the value of this island to tourists in all over the world. Also they can travel from different climatic conditions within 3 to 4 hours travel from any part of the country with the geographical size of the island. These factors are gaining additional value to their tours and to Sri Lanka to improvise tourism and countrys development. NATURAL VALUES OF SRI LANKA 9. Sri Lanka is a humid tropical island lying in the South Asian region to southwest of the Indian peninsula in the Indian Ocean. When considering the geography and topography of the island three height levels or erosion levels are recognized by their height and slope features. The first level is the largest of the three and extends from sea level to 270m above mean sea level. The Uplands or the second level extends from 270m to 900m above mean sea level and the Highlands or third level at 900 to 2420m. These height levels illustrated very valuable scenic beauty and climatic difference to the country. Most tourists attract this variation and they enjoying with these values during their visits. 10. The island has also been divided into four climatic zones based on rainfall. The Dry zone occupies less 60 per cent of the total land area of the country. Its annual rainfall is between 1250-1900 mm and its mean annual temperature ranges 27 to 30Â °C. It is characterized by monsoon forests and thorn scrublands. The Wet zone which covers approximately 23 per cent of the total land area, receives a rainfall of 2500-5000 mm per year. It consists of lowland evergreen forests, montane rain forests and semi evergreen rain forests. 11. The transition zone between the above two zones is known as the Intermediate zone where the annual rainfall varies between 1900-2500 mm. The two semi-arid zones in the South-east and North-west receive less than 1250 mm of rainfall per year. Climatic difference made wider environmental difference in the country. Therefore tourists can visit various natural environments with high variation of biodiversities. 12. Another most important natural value for tourism industry development is land portion of Sri Lanka because our motherland is small in size with only 65,610 square kilometers of land. Its significant variation in climate, topography and soil properties has given rise to a striking variety of forest types. It provide habitats for a wide diversity of faunal and floral species. In fact Sri Lanka is one of the eight Hottest Hotspots out of the 25 Biodiversity Hotspots of international significance and is ranked among the highest in Asia in terms of biodiversity per unit area. Tourist can visit through these environments because Sri Lanka provides enough facilities to watch sanctuaries, wildlife parks and forest reservoir areas after taking appropriate permissions to visits. This is a big experience for tourists because they can take most natural experiences from this tiny island. 13. Fifteen floristic regions have been recognized within the country and these diverse habitats have given rise to a corresponding wide range of natural vegetations including forests like Tropical wet evergreen forests, Tropical moist semi-evergreen forests, Tropical dry mixed evergreen forests, Tropical thorn forests, Savannahs, Riverine forests, Tropical lower Montana forests and Tropical Montana or cloud forests, grasslands, Dry Montana grasslands, Lowland grasslands, Wet villu grasslands, inland wetlands and coastal and marine habitats. Such natural values enhance the value of the country and this island world famous as one of the natural treasure of the world. HERITAGE VALUES 14. Sri Lanka is a rich country with heritage values with over 2500 years modern history and millions of years pre historic era. Most cultural and heritage values developed in the country with the influence of Buddhism and Hinduism. Sri Lanka consisted with big treasure of heritage sites and ancient constructions like Load Buddhas statues, stupas, tanks, other statues, wall paintings, cave paintings, stone carvings and religious places. Sri Lanka provides facilities to visit these heritage sites and tourists can take interesting experiences from these tours. 15. Tourists can visit ancient kingdoms like Anuradhapura, Polonnaruwa, Dambadeniya, Yapahuwa, Sigiriya and Kandy. As well Sri Lanka has number of colonial era constructions and architecture in various places and they can also see indigenous groups and their life styles if they travel to Dambana areas. Sri Pada or Adams peak, Anuradhapura Jaya Sri Maha Bodhi and Temple of Tooth relic are most important religious places of Sri Lanka and tourists can visits all these places with their interests. CULTURAL AND TRADITIONAL VALUES 16. Sri Lanka is a multi ethnic country and world most popular religious groups are living in the country. Therefore they can take experiences about the cultural and traditional differences of these communities. They can take experiences about customary food of Sri Lankans like rice and curry, hoppers, milk rice, roti, string hoppers, pittu, and kottu. They can take these experiences much easily because most local restaurants, hotels and smaller hotels provide wide range food for everyone. Furthermore tourist can buy any other cuisine from most tourist restaurants and hotels with their interests. 17. Sri Lankans celebrate various religious and cultural festivals throughout the year therefore tourists can take these experiences with seasonal celebrations like Sinhala and tamil new year, Wesak, posson and Esala festival, Christmas and new year celebrations when they visit to Sri Lanka. Esala procession and various other processions can be seen in Sri Lanka and it gains good experience for tourists because they can watch these cultural and traditional events without any payments. OTHER ENTERTAINMENTS 18. Visit to Sri Lanka provide various entertainment opportunities to tourists. They can enjoy their holidays with various attractive things like beach parties, club parties, music, bright sunshine, sea bathing and Ayurvedic treatments. Furthermore they can visit to watch whales, corals, diving events, boat trips, elephant orphanage, zoological and botanical garden. Tourist can visit to local shopping and they have opportunities to buy various attractive things like gems, handicrafts, dresses, duty free equipments and most local market items like fresh fruits, meats, fish, instant food and packet items. TOURIST DEVELOPMENT PROGRAMMES AND EFFECTIVENESS TO ECONOMIC GROWTH 19. Tourism industry is still developing after crisis environment. But large number of tourists attracted to this country after the crisis environment in 2009. Therefore tourist industry is boosted again with high potential in income ways and infrastructure development ways. Tourism sector development helped to develop countrys economy and economic development rate and it represents as a major foreign currency earning way of the country. a. Earn Foreign Money. Tourism sector directly helps to flow foreign money into the country. Tourism industry is a giant foreign income way because we can earn foreign money through providing tourist sector services to the guests and sale other type of goods and services to them. Sri Lanka earned over 213 million US dollars in 2001 from direct tourist sector services and it increase as 350 million US dollars in 2009 and 575 million US dollars income in 2010 and 645 million US dollars income in 2011. b. Develop Local Business and Tourist Sector Facilities. Tourist sector facilities also developed after the war. Large number of hotels and restaurants were closed and others depended with very low incomes during past two decades. Sri Lankan tourist sector survived in 2001 with 414 accommodations places included with 13,626 room facilities. This environment increased up to 783 accommodations with 14,714 rooms in 2010. This development helped to boost countrys economy as well we could provide food, spa services and other essential facilities to tourists through this industry and developed all these sectors during past few years. c. Attract Foreign Direct Investments. From the end of 2008 Sri Lankan economy displayed some positive attitudes again after few years. The FDIs inflow to the country in 2010 reveals that about 59 percent came into infrastructure development projects, manufacturing sector attracted 30.9 percent, service sector attracted 8.6 percent included with 2.7 for tourist sector and agriculture sector attracted 1.3 percent. China invest a large amount of financial in Sri Lankan land in tourism sector and Sri Lanka expects US dollor1.5 billion foreign direct investments through its first tourist city project. d. New Job Opportunities. Tourist industry consisted of wider job opportunities to Sri Lanka as direct and indirect job opportunities. This sector includes hotel field job opportunities, spa and saloon, guide and field services and transport sector job opportunities. Employment in tourist industry is represented 80,904 persons in 2001 and it increased up to 134,250 in 2011. Category 2001 2010 2011 Accommodations for Tourist 414 783 824 Employment of tourist Industry 80 904 132 055 134 250 Gross Tourist receipts (US dollars Million) 213 575 645 Annual room occupation rate (per cent) 42.1 70.1 71.8 Table 1: Tourism sector development 2001 to 2011. Source: Annual report 2011, Central Bank of Sri Lanka. TOURISM DEVELOPMENT AT PRESENT 20. Tourist industry has re-emerged after two decades under peaceful environment. Now most countries have removed their barriers for their citizens to visit Sri Lanka and they accept the present environment in Sri Lanka as an ideal country for tourism. Most tourist sector magazines and websites guaranteed our security environment and tourist sector services. As a result 654,476 tourists visited Sri Lanka during the year 2010 and it increased up to 855,975 arrivals in 2011. The tourist arrival has increased by 30.8 percent in 2011 than year 2010. 21. Nearly 85,874 tourists have visited in January 2012 and this trend continued until April 2012. Large numbers of tourists have arrived to Sri Lanka from European nations. They have been elected this country for their seasonal vacations after a very long time. Most of them highly appreciate about our hospitality, accommodations, our charges and new innovations in the industry. Sri Lanka could earn 830.3 million US dollar income through tourism industry in year 2012 and expect to increase tourist arrivals up to 1 million in this year. 22. Around 78.9 per cent of tourists arrived Sri Lanka to spend their holidays and most of them represent the middle income earners. Therefore, they spend little for additional purposes than their major purposes. Nearly 12.7 per cent visited Sri Lanka for business requirements and 5.4 per cent visited to met their relations and pals. Most tourists visit Sri Lanka to take more opportunities in visiting sites and engage in entertainments under effective budget. They have been attracted by our Ayurvedic treatments and spa services because they have to pay large amount in their countries for such services. Item 2001 2005 2010 2011 Tourist arrival for pleasure 300,545 382,321 516,538 Tourist arrival for business 22, 677 92,879 83,270 Tourist arrivals for other 13,572 74,108 54,668 Total Tourist arrivals 336,794 549,308 654,476 855,975 Table2: Tourist arrivals to Sri Lanka from 2001-2011. Source: Annual report 2011, Central Bank of Sri Lanka. GOVERNMENT EFFORT 23. Sri Lankan government has identified the requirements of tourist sector developments and has given priority to develop this country as a tourist destination. Under this programme the government has provided various facilities to tourists, tourist sector entrepreneurs and employees. Government has given much stronger support to these programme because it can use as major income of the country. a. Government has arranged giant hotel development programmes and attracted world largest hotel sector entrepreneurs to the country. b. Introduced new tourist destinations like Nilaweli, Arugam bay, Mirissa and reopened Kumana and other sanctuaries to tourists. c. Conducted international level promotion campaign to give publicity about Sri Lanka. This program conducted through diplomatic relationships. This programme was named as Visit Sri Lanka. d. Government has launched urban development programmes to construct major cities of the country to enhance tourism. These projects enhance the infrastructure facilities, tourist information premises, standard accommodations, leisure areas and important places of the each region. 24. Sri Lanka Tourist Board and Sri Lanka Tourism Development Authority are operating under the authority of Ministry of Tourism and these organizations helped to develop tourism in the country. The Sri Lanka Tourism Development Authority was formed under Section 2 of the Tourism ACT. SLTDA has provided several facilities to develop tourism in Sri Lanka. Ministry of tourism organized programmes to protect tourist industry and national values of the country with: a. All tourist sector services registered under the Tourist board and arranged limitations and standardization methods to enhance accommodations, restaurant, transportation and tourist guide facilities of the country. b. Manage and maintain tourist development programmes with the support of ministry of cultural and heritage. c. Banned illegal drugs, prostitutions and some alcohols in the environment of tourism industry. Sri Lanka police provide essential service and support to this program. Sri Lanka police has established special police unit to handle tourism related cases of the country. d. Tourist Board and Municipal Councils maintain Tourist information centers in all major cities of the island. 25. Sri Lanka expects to enhance tourism industry as the main contributor of our economy. Therefore we expect to attract 2.5 million tourists in 2016 and it will use to develop the economy of the country. Most infrastructures development projects help to enhance tourism sector of the country. Today our road network upgraded as international levels and local aviation systems also started to provide good service to tourists. Sri Lanka Air force and civil aviation authority provide good service to boost this programme. CHALLENGES AND THREATS FOR FUTURE TOURISM 26. Tourist industry of the country is developing with a rapid growth rate at present. Most accommodation and restaurant facilities comprehensively renewed to enhance tourism of the country. But we have been faced several issues in this sector with higher tourists arrivals. Comfortable accommodations and tourist board approved restaurants are not enough to handle the capacity of tourist sector. Number of new hotels and motels are constructing in everywhere of the country but we cant reach the goal in 2016 without expedited programmes in this sector. Our economic development goals are illustrated through these objectives, therefore we should be needed to catch these goals in correct time. 27. New tourist destinations need more accommodations, sanitations and restaurant facilities. Accommodations and restaurant facilities are very poor in northern region and new constructions are going under way. Therefore foreigners still do not visit to these areas. Sri Lanka is a maritime nation and most tourists like to spend in beach areas but our lifeguard services are not enough to provide good security to tourists who use our beaches and sea areas. As well Sri Lanka has beautiful inland water reservoirs but these resources cannot be used by anyone under lack of trainee personalities around those areas. 28. Prostitution and drug usage are other key issues in Sri Lanka. As well some tourists find sexual pleasure during their tours therefore these businesses are secretly arranged in Sri Lankan environment. Gay sexual participation is higher than female prostitutions because this method can be used without major problems under present legal process. Over 40,000 prostitutes and around 150,000 secrete prostitution members engage in this business. 29. Tourism industry is widely spread in most countries and numbers of regional countries provide remarkable facilities to foreigners. Thailand, Maldives, Singapore, Vietnam and India are key competitors in this region and they provide prostitution services to tourists and they have given relatively low cost packages to visitors. But we have faced big issues in this matter because Sri Lankan law enforcement, social environment, religious environment and health environment do not allow for prostitution in this country. Especially HIV infection is widely spread with prostitution, therefore this matter is a big challenge to the Sri Lankan environment. Sexual transmitted diseases and gambling have wide spreaded in tourist destinations and it will expand with new tourist destinations too. 30. Large number of persons engage to this massive business as Tourist guides or transport agents. But most of them engage in this giant industry without any professional qualification and it affected to gain many adverse results to Sri Lanka. This industry need professional persons in many fields like multiple language users, professional chefs, waiters, tourist lecturers and musicians to develop tourism in Sri Lanka. We can earn additional income through our cultural events and Ayurvedic treatments but the problem is most of these sector professionals are very rare in modern environment. SUMMARY 31. Sri Lanka is a great tourism destination and it is popular among Europeans since 12 Century. This industry developed in this country with three key factors like Sri Lanka is an authentic tourist destination, the country is a compact Island of 65610km and biodiversity and heritage spread is in a very widen range than other countries. As well this country is situated in a key position in international naval trade route and it can use to develop tourism industry. 32. Sri Lankan people, culture, spices food, gems, handcrafts, festival features, religious environments and adventure events increase the value for real tourism sector development. Sri Lanka is a key maritime nation and now we need to develop this country as economically developed country. Therefore we need to find suitable income ways and tourism industry is very important for that. Tourists highly interest to visit this island therefore we need to provide essential facilities and effective packages to enhance tourism industry. 33. Past dark years conflict environment adversely affected to tourism industry and it vigorously affected to decline economic development of the country. Sri Lanka survived with agriculture Corps since ancient history but now we need to develop with much stronger economic strategies. Therefore Sri Lanka needs to enhance tourism sector development with proper government mediations. 34. Over 800,000 tourist visited this country in 2011 and it continued in first quarter of 2012. In 2011 Sri Lanka earned 830.3 million US dollars through tourism and government expect to increase up to 1 million tourists visits in 2012. With the current accommodation facilities we can manage this target and now we need suitable expedited programmes to enhance tourist industry infrastructure developments in next two or three years. RECOMMANDATIONS 35. Government should be needed to mediate to solve tourism sector issues, especially in Sri Lanka tourism sector need large number of professionals in each fields. Therefore government should be needed to implement training and development programmes or standardization method to categories tourism sector employees as standard level. 36. Tourist Board can implement training programmes for tourist guides who work as beach boys or guides at present. This programme should be included registration system and need to issue standard identity card for them. This process is helping to increase talented job opportunities and it is effective to enhance the economy of the country. 37. Sri Lanka expects to earn foreign currencies through tourism therefore we need to standardize tourism sector price ranges and service values because tourists expect effective service during their visits. a. We can introduce proper billing method for accommodations. Under this we can implement suitable range of prices for each hotel classes. b. We can introduce proper local taxi services and tourist transport process to enhance countrys transport facilities for tourists. c. Ayurvedi spa services and medical facilities should be need to categories with proper ways. 38. Sri Lanka need 40,000 to 50,000 accommodation facilities to enhance tourism in next few years. Therefore government should be needed to provide additional facilities to attract new local and foreign investment to his sector. 39. Harbor and airport development programmes directly support to enhance our economy but we can earn additional foreign income with the development of tourism industry. Most international mariners and aviation industry professionals need accommodation facilities during their journeys therefore we can develop new tourism environment among these people. 40. Sri Lanka needs new law enforcement to develop tourism industry because most tourists visit this country for pleasure or joining with various entertaining events. We should be needed to provide some essential services like gambling and some alcohols to tourist under new formations. 41. Sri Lanka has a beautiful natural environment therefore we can market this resources through eco tourism development. Most foreigners are interested in spending their leisure with the natural environment. 42. Ayurvedic medicines and treatments are very important to enhance tourist attraction. Therefore we should be needed to introduce proper framework to provide correct ayurvedic treatments to tourists. B M A N V GUNATHILAKA CR Lieutenant Student Officer

Retrospective Narration in A Rose for Emily Essay -- A Rose for Emily,

Retrospective Narration in A Rose for Emily â€Å"Now and then we would see her in one of the downstairs windows—she had evidently shut up the top floor of the house—like the carven torso of an idol in a niche, looking or not looking at us, we could never tell which. Thus she passed from generation to generation—dear, inescapable, impervious, tranquil, and perverse.† (128) Because â€Å"A Rose for Emily† is narrated in retrospect, this description of Miss Emily’s relationship with the town possesses a kind of foreshadowing not always present in stories narrated as the action unfolds. Each word takes on added meaning given that the narrator already know about Homer Barron and the room upstairs. Thinking back, the narrator recalls, â€Å"Now and then we would see her in one of the downstairs windows.† Likely, it only occurred to the narrator after learning about Homer Barron that Miss Emily was always in a downstairs window. In fact, earlier in the story, the narrator only says that â€Å"a window that had been dark was lighted and Miss Emily sat in it† when the men of the won sprinkled lime around her house to kill the offensive smell that emanated from it. He does not specify where in her house the window was. Moreover, he declares that Miss Emily â€Å"had evidently shut up the top floor.† Obviously, it was only â€Å"evident† that Miss Emily had closed off the upstairs of her home after her death when the townspeople forced their way into the house, up the stairs, and into the tomb-like room where the body of Homer Barron lay. This passage also plays with the notion of seeing and being seen, the ambiguity of watching and being watched. The narrator states, â€Å"Now and then we would see her.† He goes on to explain that whether Miss Emily was â€Å"look... ...tate when she buys the arsenic to poison Homer Barron, nor is it her state when she refuses to let her father’s dead body be removed from the house. Finally, â€Å"perverse† confuses the reader until she reaches the end of the story. At the point where this passage occurs, Miss Emily seems a bit odd and, perhaps, insane, but there is nothing to indicate that she is â€Å"perverse.† The narrator already knows of Miss Emily’s â€Å"perverse† actions; thus, this serves as further foreshadowing of the townspeople’s discovering Homer’s body and apparent evidence of Miss Emily sleeping with it until her death. While a short passage, this one illustrates the nature of the story itself. The narrator tells the tale in retrospect, thus possessing knowledge that the reader does not. It is for this reason that the narrator reveals aspects of the story that foreshadow the grand finale. Retrospective Narration in A Rose for Emily Essay -- A Rose for Emily, Retrospective Narration in A Rose for Emily â€Å"Now and then we would see her in one of the downstairs windows—she had evidently shut up the top floor of the house—like the carven torso of an idol in a niche, looking or not looking at us, we could never tell which. Thus she passed from generation to generation—dear, inescapable, impervious, tranquil, and perverse.† (128) Because â€Å"A Rose for Emily† is narrated in retrospect, this description of Miss Emily’s relationship with the town possesses a kind of foreshadowing not always present in stories narrated as the action unfolds. Each word takes on added meaning given that the narrator already know about Homer Barron and the room upstairs. Thinking back, the narrator recalls, â€Å"Now and then we would see her in one of the downstairs windows.† Likely, it only occurred to the narrator after learning about Homer Barron that Miss Emily was always in a downstairs window. In fact, earlier in the story, the narrator only says that â€Å"a window that had been dark was lighted and Miss Emily sat in it† when the men of the won sprinkled lime around her house to kill the offensive smell that emanated from it. He does not specify where in her house the window was. Moreover, he declares that Miss Emily â€Å"had evidently shut up the top floor.† Obviously, it was only â€Å"evident† that Miss Emily had closed off the upstairs of her home after her death when the townspeople forced their way into the house, up the stairs, and into the tomb-like room where the body of Homer Barron lay. This passage also plays with the notion of seeing and being seen, the ambiguity of watching and being watched. The narrator states, â€Å"Now and then we would see her.† He goes on to explain that whether Miss Emily was â€Å"look... ...tate when she buys the arsenic to poison Homer Barron, nor is it her state when she refuses to let her father’s dead body be removed from the house. Finally, â€Å"perverse† confuses the reader until she reaches the end of the story. At the point where this passage occurs, Miss Emily seems a bit odd and, perhaps, insane, but there is nothing to indicate that she is â€Å"perverse.† The narrator already knows of Miss Emily’s â€Å"perverse† actions; thus, this serves as further foreshadowing of the townspeople’s discovering Homer’s body and apparent evidence of Miss Emily sleeping with it until her death. While a short passage, this one illustrates the nature of the story itself. The narrator tells the tale in retrospect, thus possessing knowledge that the reader does not. It is for this reason that the narrator reveals aspects of the story that foreshadow the grand finale.

Coral Reefs And Bleaching Phenomenon Essay -- essays research papers

Imagine yourself observing one of the most diverse ecosystems on earth. Thousands of species of plants and animals provide a dizzying array of color and motion. Massive structures provide a canopy that shelters hundreds of exotic species in a myriad of microclimates. As land-based observers, we almost automatically assume that this is a description of the rich ecosystem of a tropical rainforest. However, if we take ourselves off the safety of dry land and immerse ourselves in the ocean, we will find an equally dynamic environment in the depths of our world’s coral reefs. As a Zoology major, I quickly decided to explore this biological component of the ocean environment. In the following paper, I will provide a general overview of coral reefs and examine the alarming depletion of coral and their ecological symbionts in a process known as coral bleaching.   Ã‚  Ã‚  Ã‚  Ã‚  As mentioned earlier, coral reefs are among the most diverse and productive of all communities on Earth. They are also the largest biological structures on the planet. The Great Barrier Reef, along the eastern coast of Australia, covers over 2000 kilometers and is said to be visible from the moon (Goreau, 1987). While the size of coral reefs can be enormous, their real impact is on a much smaller scale. Reefs function as food and shelter for fish and marine invertebrates. While the coral itself is an animal, through a symbiotic relationship with the unicellular algae, coral becomes the primary producer in its ocean ecosystem (Richmond 1993). The reefs are formed by calcium carbonate deposits produced by the coral polyps. According to the legendary Cousteau, in his book The Ocean World, tube worms and mollusks also donate their hard skeletons to the architecture of the growing reef (174). Biologically active compounds are also produced by reef dwelling organisms an d posses antimicrobial and antiviral properties (Van Alstyne 1988). In fact, coral produces a natural sunscreen that is currently marketed and also holds promise in generating chemicals for AIDS and cancer research. In 1995, researchers mimicked the structural components of coral and now use the patented super hard compound to repair shattered human bones (Alderage 1995). Further more, coral reefs are naturally extremely productive fishing grounds. In fact, healthy reefs produce up to 10-100 times more yield per unit a... ...pear, the fate of one of the world’s most diverse ecosystem remains to be seen. Bibliography Alderage, Susan. April 1995. â€Å"Coral :Replacement for Human Bones.† Focus Magazine. P45(46) Brown, B.E., Odgen, J.C. 1993. â€Å"Coral Bleaching.† Scientific American, 269:64-70 Cohen, Anne L.; Lobel, Phillip S. Oct. 1997. â€Å"Coral Bleaching on the Johnston Atoll.† The Biological Bulletin. V193: n2. P276(4). â€Å"Coral Color.† November 1997. Discover Magazine-Current Clips. P10 Cousteau, J. Y. 1985. The Ocean World. Harry N. Abrams, Inc., New York, NY, pp. 174-175. Goreau, Thomas. August 1987. â€Å"Coral and Coral Parks.† Scientific American. V113:34-36 Luoma, Jon R. Nov. 1996. â€Å"Reef Madness† Audubon. V98: n6. P24(3). Richmond, R. H. 1993. â€Å"Coral Reefs: Present problems and Future Concerns Resulting form Athropogenic Disturbence.† American Zoologist. V33: P524-536. Van Alstyne, K. L. and V. J. Paul. 1988. â€Å"The Role of Secondary Metabolites in Marine Ecological Interactions.† Proceedings of the 6th International Coral Reef Symposium, Australia, Vol. 1. Wilkinson, C. R. 1987. â€Å"Interocean Differences in Size and Nutrition of Coral Reef Sponge Populations.† Science, Vol. 236: P1654-1657.

Revitalization of the Daugava Riverside by the City of Riga

Urban contextHistory and urban construction alterationsRiga is the capital of Latvia which is a Northern state of Europe. The metropolis is good known by the Historic country inscribed in UNESCO’s World Heritage List on 4 December 1997, is considered of one of the largest and dynamic metropolis in Northern Europe whit the entire country is 304,2 square kilometres and the population around 713,000 in dwellers. The Riga metropolis has a really long and copiousness history which has a great influence to the urban context of the metropolis. Particularly in the 19Thursdayand 20Thursdaycentury, when World War I and World War II occurred, the state is under controlled of Russian Empire ( 1721 – 1917 ) , Germany ( 1917 – 1918, 1941 – 1944 ) and Soviet Union ( 1940 – 1941, 1944 – 1991 ) which changes the civilization every bit good as the manner of life of people, the urban construction and architectural of the whole metropolis is varied and complex. During the clip of the Russian Empire and Germany, Riga is a seaport metropolis which is the most vivacious and dynamic with over 800,000 industrial workers from Baltic state, Riga become the 3rd largest metropolis in term of the figure of workers after Moscow and Saint Peterburg. The value of the Daugava river and its waterfront was enhanced but it is dominated for ports and mills. As a consequence, the population of Riga metropolis increased rapidly which went along with the demand of lodging and infinites. More houses were built but harmonizing to Russian military ordinance, the people merely have the permission to construct wooden house in suburbs. In 1812, the wooden houses were destroyed by war and they were rebuilt but still follow the old wooden signifier. In mid-nineteenth century, the wooden houses have raised in figure and became surrounded the metropolis centre. These houses nowadays is a heritage and affects strongly to the preservation policy and urban theory. In 1860, a new maestro program with avenue, blocks of flat, alternate edifice and park were established. A new rail route was opened which stimulated the development of suburbs and mills, Riga port at that clip has the highest gross in Russian Empire, the river bank was developed rapidly. It led to a consequence that the economic system and the metropolis life existed with a strong connexion which is the chief quality of the development undertaking in the hereafter. In the period of So Viet Union, a new urban program was approved with the building of the big graduated table lodging undertaking every bit known as â€Å"mikrorayon† and the railway belt environing the metropolis centre. Besides that, the construction with the critical tallness such as Television tower ( 368m ) , Latvian academy of scientific discipline ( 108m ) were built, along with it Numberss of architecture tendencies were appeared in the urban context of Riga and one of those is the Art Nouveau which have specific architecture and the restriction of constructing tallness of 5 narratives. The alterations in urban construction in the Soviet Union times have the sinewy impacts to the policy of preservation in the current clip every bit so as the high restriction of edifice in the metropolis. Riga metropolis from holding independency boulder clay now ( 1991 – now ) has the important development. After 1995, metropolis started to reconstruct the valuable edifice and lodging which is considered as a roar in building at that clip, the service and new map edifices was established in the suburbs, efforts have been made to recover cultural symbol, historic value and houses which are lost after the 2nd World War. In the Riga particular program of 2006 – 2025, the new Riga centre has been created with the visions: planned as an country which is contrast the Old Riga in the right bank of Daugava river in a modern architecture and construction, full of map and services in which concern maps play as an of import function. Reduction in conveyance force per unit area in the Old Riga centre where the old circulation system to guarantee the saving intent of the old site. An international competition was hold by City of Riga to plan the new Riga along the left bank of the D augava River at that clip.Site contextThe riverbank of Daugava screens really larges districts in the entire cityscape country and travel along with the development of Riga through historical timeline when the metropolis economic system and day-to-day life have a stable nexus with the river Bankss. From the clip when Riga was found until now, the river has an every indispensable portion non merely because it is a metropolis natural component but besides the finding in planning and spacial individuality of the metropolis. For illustration, during the clip of Russian Empire and Soviet Union, because of the great function in H2O transit and industry, the metropolis construction has changed for the intent of functioning lodging for employees and edifice railway countries. From the really shortly period of 13Thursdaycentury, the substructure of Riga metropolis was changed, for functioning and linking seafaring with river transit by flatboats on Daugava, the merchandisers in Riga have cre ated a vivacious trading metropolis centre, the circulation system, constructing quality and unfastened infinite was improved for lading concern and burden. Until the 19Thursdaycentury, as a consequence of the rapid industrialisation, the development of railroads web and the embankment of port installations, the component of the ricer such as: islands, waterfront, etc. was transformed with the edifice of industrial objects and warehouses. It is assumed to be a comfortable clip of Riga Port every bit known as the major port of the Russian Empire. At the beginning of 20Thursdaycentury, a portion of Riga port was still situated right opposite the Old metropolis centre. The map of the market and the seaport was terminal in 1930 when the Central Market was established and broad public infinite were created in the metropolis centre. In World War II, the river Bankss of Daugava were destroyed, until 1949, they were reconstruct for basic and local transit demands. The port developed stronge r in lower Daugava, near the Bay of Riga. At the same clip, the developing industrialised countries along the riverbank appeared architecturally distractively and forestall the handiness of citizens. Presents, Riga metropolis has a develop program to work and reconstruct the value of the left bank and the right bank of Daugava river. The bing issue is traversing the river by Bridgess causes traffic jams in haste hours because of the high rise of autos and personal transit means. The infinites of Daugava river is defined by its derelict Bankss and aquatorium which is non considered to be a portion of incorporate urban environment in physically and psychologically. But due to the impacts in spacial composing and urban development in the yesteryear, the Daugava river can be understood as ‘the river of possibilities’( Dace Kalvane, 2010 ) . Its infinites can do a general position of metropolis position and lift. However, the handiness is prevent by bing substructures such as: span entree inclines and arterial roads which take downing the chances of river Bankss redevelopment and interaction for public community with waterfronts. The busy traffic flows separate the walkin g waies and diversion zones from the river Bankss. There is a deficiency of bike roads system in Daugava river countries. Those things led to a consequence that the river is about abandoned, it became more clearly when the old developments which were created in the yesteryear have lost their function in metropolis economic system and current developments have no connexion to the river. The development schemes for Riga metropolis from 2006 to 2025 expect to animate the nexus with Daugava for doing an active waterfront. Therefore, a varied enlargement of the riverbanks from different countries such as: container port and ware house country will be developed. The building of commercial, touristry sites, prosaic walk ways and bike roads which start from the suburbs to metropolis centre would be an interesting vision of substructures.Undertaking analysingUndertaking debutThe building, revival of Daugava riverbank and new modern urban one-fourth every bit good as its jobs in development has become a challenge and chief inquiry in several competitions and workshops hold by the City of Riga. One of those is the completion named â€Å"The prospective building on Mukusalas Street, Buru Street un Kilevina Ditch† occurred in 2006 to 2007. As the victor of this competition, the undertaking called â€Å"City of squares metropolis of towers† introduced a big country of new urban tissue on the left bank of Daugava river which is opposite with Old Riga centre and has the chief quality is the H2O elements and its of import function in the history. The undertaking belongs to the extension of protected UNESCO zone. The proposed maestro program includes the development of a system of squares, public infinites, mix-used edifice and flexibleness. Those squares and towers contribute in specifying their active surrounding and construction country. Furthermore, supplying feasible rules to guarantee an articulated brotherhood become more cardinal than the elements create it. The chief points of this undertaking is the systems of squares and tower which create the frame position of develop country of Riga metropolis. The new develop country is the theoretical account of long-run vison of the metropolis, make a new full map which portion the force per unit area of transit and dweller with the Old Riga centre, assisting in saving the civilization and heritage which is the most point attended in undertaking over the universe in by and large and in Europe peculiarly. In the article â€Å"Measuring urban heritage preservation: theory and structure† by Silvio Mendes Zancheti and Lucia Tone Ferreira Hidaka. They mentioned: â€Å"The sustainable preservation of urban heritage sites depends on the care of their present and past significances† . To make the end of sustainable